Owner manual

page 8 Instant Replay Owner’s Manual
TRANSPORT CONTROL BUTTONS
The Transport Controls include STOP, PLAY and RECORD. They perform in the traditional manner
of tape recorders:
Stop
Immediately ends recording or playback. Stops some sequential operations, such as File
Transfer and Copy Bank.
Play
Starts playback of the currently selected Cut. Note that pressing PLAY initiates playback from
the beginning of the selected Cut, even if it is already playing. The exception is when PLAY is
used to disengage PAUSE.
Record
Places Instant Replay in Record Ready mode. (Instant Replay will allocate disk space, and
then enter record when the PLAY button is pressed.)
FUNCTION BUTTONS
These include:
Bank Select
When you press the BANK SELECT button, it lights and the top row of Hot-Keys flash. The
display changes to show the Number and Name of the current Bank; the number of Hot-Key
Assignments it contains; and an indication of the presence of a Playlist in the Bank. Pressing
Hot-Keys 1-10 will directly select the corresponding Bank.
Alternately, the SCROLL ARROWS may be used to view the Banks. Pressing ENTER will
activate the Bank that is currently shown on the display. Pressing BANK SELECT again or
CANCEL exits this mode. If no keys are pressed for 10 seconds, Bank Select mode will time
out and return to Stop mode.
When an external drive is connected and enabled in the Configuration menu, the I and E keys
are used to select the Internal or External drive. See Using an External Drive on page 24.
Assign Hot-Key
The ASSIGN HOT-KEY button lights and the Display prompts selection of a HOT-KEY.
Pressing a HOT-KEY immediately assigns the Cut shown in the top line of the Display to that
HOT-KEY. If this Cut is already assigned in this bank, that assignment is cleared.
You can select other Cuts to be assigned using the SCROLL ARROW keys or FIND. With the
new Cut selected, press the HOT-KEY you wish to assign it to.
To exit, press ASSIGN HOT-KEY again, or CANCEL.