Instruction Manual

Technical Specifications •
••
• 81
Appendix F
Technical Specifications
General Specifications
I NTERNAL H ARD D ISK
(Drive data from manufacturer)
Capacity 20GB standard; larger sizes available
Hard Disk Reliability MTBF: >250,000 hours
R EMOVABLE C ARTRIDGE
(Zip drive and cartridge data from manufacturer)
Type and Capacity Zip250™ magnetic disk; Zip100 disks may also be used.
Insertion/ Removal Cycles 2,000 minimum
Estimated Shelf Life 10 Years
Cartridge Drive Reliability MTBF: >100,000 hours
M ISCELLANEOUS
Cue to Next Cut Instantaneous on all drives, except Zip drive.
Display 240 x 64 pixel (7 x 40 characters) backlit LCD
Level Metering Quasi-peak responding LED display
GPI Remote controls Remote contacts with return lamp drive; 25-pin "D” connector
Serial Remote control Full control with EIA-485 (EIA-422 compatible); ES-Bus interface;
9-pin "D" connector
Cue Controls Secondary: N.O., Open collector output
Cue Erase SEC cues may be individually erased
Cue Relocate Placing a cue overwrites any previous cue marks
Rack Mount Form Factor 2U, 19” rack width
Agency Approvals See “Safety Compliance”, inside front cover.
Power 115/230 volts AC, 50/60 Hz, 1.0 A Max
Country of Origin USA