- LG Software Innovations Coffeemaker User Manual

Install and configure ITG ISL Trunk node Page 233 of
378
ITG Trunk 2.0 ISDN Signaling Link (ISL) Description, Installation and Operation
6 For each ITG Trunk card in each monitored ITG Trunk node, add a line
consisting of three fields separated by spaces. Enter the first line
beginning underneath the last line that begins with a "#"., Lines
beginning with “#” are comments and not processed. Do not begin any
of the lines defining ITG devices with “#”.
7 Click File | Save.
8 In the Alarm Notification Run Options window, click OK.
MAT Alarm Notification must be restarted whenever Control Files are
changed.
Figure 42
Devices.txt file
Table 40
Format of Devices.txt file
Device Type IP Address Device Name
ITG xxx.xxx.xxx.xxx Site_Leader_0
ITG xxx.xxx.xxx.xxx Site_Leader_1
ITG xxx.xxx.xxx.xxx Site_Follower_2
Note:
The Device Name cannot contain any spaces. Use a descriptive name for
the Meridian 1 site where the ITG Trunk node is located.