® User Manual
Anatomy of a 3LT Tripod & AirHed Release Plate Lock Tri-Mount Plate Central Column Release Plate Para-Lock Pano Clamp Lock* Collar Locking Ring Leg Catch Hinge Locking Knob Para-Lock Pan Base Boots *Not Applicable to AirHed Mohawk
Reference Guide At 3 Legged thing we believe in giving you the very best in functionality without compromising on capability or performance. As such, we offer the three leg angles that we consider to be optimum for using a tripod. They are 23˚, 55˚ & 80˚. Each angle has its own merits. 23˚ is the angle usually associated with normal tripod use. 55˚ is more commonly used for specialist applications such as Macro Inverted mode or Tri-Mono mode.
Key Features a c We try and do things a little differently at 3 Legged Thing, so you may find some features that you aren’t familiar with... b d e The Tri-Mount plate (a) comes with three extended spurs and a narrower plate section, so that you can still counterfold your legs with the column removed. You can also clip your strap to the plate, and to the D-ring at the bottom of the column, so that you can transport your tripod easily without a case.
Basic Functionality c 3LT tripods are hugely versatile, and can be used in a number of different ways. In order to achieve this, there is some basic functionality that you need to understand. How to remove the central column*. 1: Underneath the tripod column is a D-Ring (a). This unscrews from the bottom of the central column. Once removed, undo the collar (b) by one full turn and the central column (c) can be pulled straight out. Continue to undo the collar and remove it.
Basic Functionality continued... How to detach the monopod leg. The monopod leg is denoted by a thin copper ring on one of the leg hinges and can be unscrewed directly from the leg hinge (a). At the top of the central column is the Tri-mount plate and threaded bolt (b) which can be unscrewed and removed, and then screwed directly onto the monopod leg (c). a If you understand these basic functions, you will be able to use each of our tripods in all compatible “modes”.
Leg Mechanism & Maintenence b We’ve dispensed with the conventional friction lock and introduced a brand new Paralell locking system, for greater security and ease of use. Our new Para-locks work by restricting the opening movement of the friction lock, preventing you from accidentally unscrewing the lock until the leg section detaches. a We have, however, made it possible for you to undo the lock so you can perform routine maintenece to your tripod.
AirHeds and Release Plates Evolution 3 AirHeds have a circular clamp design, to make them easier to stow when counterfolding the legs. There are two basic clamp types - Pano & Standard. Both clamps have a locking knob( a) for releasing the Peak Design Compatible Quick Release Plate. The Pano-Clamp also has a copper knob (b) which locks and unlocks the panning function. The new release plate (c) is designed to be compatible with all Peak Design Capture products.
AirHed & Pano-Clamp Functionality b Under your release plate is a central bolt with a hex screw (a). If you undo this screw with the tool provided, you can detach the whole clamp from the ball shaft, leaving the central hole open (b). The internal thread is now 3/8” and so can be mounted on your monopod leg or directly to your mounting plate(c).
AirHed Capabilities Your AirHed has capabilities rated in three different ways. Head capabilties should not be confused with tripod capabilities. Care should be taken to understand the differences before using the product. Direct Load: With the head level and the clamp level, a direct downward load can be applied up to the capacity. Drag: Drag is the load it requires to make the ball move within the head. This is tested by angling the ball and adding pressure until the ball moves.
The most versatile tripod system in the world. We have a range of accessories to compliment your tripod and AirHed. Check them out at www.3leggedthing.
3 Legged Thing is part of The Elemental Group of Companies Unit 9 Kinsbourne Farm : Bury End : Stagsden : Bedfordshire : MK43 8TS : United Kingdom tel: +44 (0) 1234 947777 : email: sales@3leggedthing.com : web: www.3leggedthing.
