User's Manual

Our duty is ensure your safety, so you can rely on an excellent device
Function : A or B or C or D hoist function switch.
Operation:
Press button A or B or C or D, then corresponded relay A or B or C
or D will keep hold.
Position: K9, K10, K11, K12,
K11, K12, K13, K14
Auto Sleep Mode on Transmitter ☺
APOLLO transmitter could be set to sleep mode automatically, for higher security request,
shorten S3 ( could be found in encoder board ) would make transmitter into sleep mode
automatically after 5 minutes without operation. Simply return EMS push button to re-start
APOLLO Transmitter. ( setting already ex-works )
Auto shut down on Receiver ☺
APOLLO receiver could be set to shut down mode automatically, for higher security request,
shorten S2.4 would make receiver shut down automatically after 5 minutes without operation
( only setting ex-work on demand ).
Status Indicator of transmitter ☺
APOLLO transmitter has a dual-color indicator ( green*/red** ) to show various status as follows :
Green*: battery power is sufficient.
Red** : battery power low. Please re-new 4pcs of AA/UM-3 ( 1.5V ) alkaline batteries,
or nickel rechargeable batteries immediately.
Stand-by
green indicator light is blinking 1 time every 4 sec. ( EMS is on )
operation
green indicator light is blinking 1 time every 1 sec. ( EMS is on )
Sleep mode
No indicator light is blinking ( EMS is on )
Power off
No indicator light is blinking. ( EMS is off )