User's Manual

Our duty is ensure your safety, so you can rely on an excellent device
Function Setting : ☺
APOLLO system has complete setting software, which accepts different requests from customers. An
extra Function Kit may be needed for custom-made settings. ( See fig. 3 )
NOTE:
1) The function setting program is only operated under Window 98 Version.
2) The function kit has to extra plug in the JP3 ( DB9 pin ) on RECEIVER decoder ( relay ) board to
work the function setting.
3) Operation steps:
 Clip ‘ start ‘ in Window 98
 Select ‘ program ‘
 Select ‘ Apollo ‘
 Clip ‘ project – AP3 ‘ … set up program starts now
Every set of motion ( A/B, C/D, E/F, G/H, I/J, K/L ) all can be set function per customer’s
Need. Function setting options are as the following: ( See fig. 4 )
1) Interlock – ex-factory setting, when pressing A and B simultaneously, no function output , this is
for security reason.
2) Non-Interlock – For some occasions if the interlock is not necessary, just clip the ‘ non-interlock
‘ function.
Special push button
E, G, I, K : Press to start-up
Power-on key
EMS-stop
p
ush butto
n
( fig. 2 )