User's Manual

5
Our duty is ensure your safety, so you can rely on an excellent device
(h) Fix the wired pendant in safe position.
( fig. 1 ) ( example for fix / install receiver )
(a) Ensure the output contact as Main / A / B/ C / D / E/ F / G / H can not over 5A ( see
Wiring diagram after page 18 ).
(b) Please double check exactly the wiring layout after receiver’s installation, then turn the
power on.
(c) Please mount the receiver away from INVERTER, MOTOR and connected CABLE at least
3M to avoid interference happened
Operation steps ☺
How to start up the Apollo device:
1. Power on receiver.
2. Insert the transmitter power-on key and turn on the “ mushroom “ EMS push button.
3. Press any button and release to start-up receiver.
How to turn off the APOLLO device:
1. Press down the “ mushroom “ EMS push button ( At this moment, the internal Main contact
will be OFF ).
2. Pull out the transmitter power-on key.
3. Shut down the receiver.
Take 4pcs of 8mm tap screws,
screw tightly by electronic tools.
Mounted receiver in a
firmed site where the dual
color LED can be seen
caution