User's Manual

Our duty is ensure your safety, so you can rely on an excellent device
Status Indicator of Receiver ☺
APOLLO receiver has a dual-color indicator, GREEN for POWER, RED for SQ*.
And the dual-color indicator ( green/red ) also shows various status as follows:
SQ*: RF indicator light
Please NOTE that the SQ will NOT be lighted ( off ) when using its own transmitter , it means the
transmitted signal has been received by receiver and decoded correctly.
Main, A, B, C, D, E, F, G, H, I, J, K, L has its own indicator. When indicator is light, it means the relay
contact is ” On “, vice versa.
Precaution ☺
 For safety consideration, complete training can only be offered / authorized to the operator.
 Please read thoroughly the operation manual before using APOLLO system.
 Regular maintenance / testing can extend the components’ life, malfunction will also be found
prior.
 Before operating the transmitter please check by power-on key, see if the battery power is
sufficient. If not, please change a whole set of new battery. For a long term period without
operation we suggest you to take out of the batteries.
 Do not try to change or move the internal components without authorization, please contact
your supplier, or the professional engineer who has the experience in industrial remote
controller for maintenance / repairs.
When the remote controller be struck by lightning, please stop operation and contact your
supplier as soon as possible.
Stand-by
both green and red indicator light is ON.
operation
green indicator light is ON, SQ ( red light ) is off.
Power off
both green and red light is OFF.
SQ Red light blinking slowly
( 1 time/sec. )
Malfunction may be incurred, please follow our trouble
shooting for repair or call service.
SQ Red light blinking fast
( 3 times/sec. )
the ID codes between transmitter and receiver is
switched different.
Please check the codes on both transmitters and
receivers, and switch them to the same positions..