Specifications

the latest version, if you have installed a later version of 2X

ThinClientOS on the 2X ThinClientServer.

Configuring a thin client to boot from a hard disk, USB or

flash disk (Network install)

1. Configuring the thin client to boot via PXE: Enter the BIOS of the

thin client / computer and configure it to boot via PXE. Reboot

the thin client / computer, enter the BIOS, and check for a boot

sequence entry. For more information, check the documentation

of your thin client / computer.

2. Booting the thin client for the first time: You will need to boot the

thin client so that 2X ThinClientServer can add the thin client to

the list of detected thin clients. Once the thin client has booted

successfully and displays the login screen, you are ready to

move to step 3.

3. Flagging the thin client for a disk install

Screenshot 43: List of thin clients

3.1. Select the thin client(s) where you would like to have the

2X ThinClientOS installed and click on “Install to Disk” >

“Queue for Disk Installation”. This will change its status to

“Pending Disk Installation”.

Be sure to make a backup of all important data before installing

2X ThinClientOS on both the USB and hard disk.