Specifications

54
c) Erase entire hard disk this option will erase all data on
the hard disk and create a single partition for 2X
ThinClientOS.
d) Manually partition this option will start a partitioning
program and allow you to re-partition the hard disk. After
the partitioning is complete, the installer will allow you to
select which partition to install 2X ThinClientOS on.
5. The installer will now prompt you to install a boot loader
menu. This allows you to select, at boot-time, whether to
boot into 2X ThinClientOS or whether to boot into the
Operating System which was originally installed.
6. The installer will now copy the 2X ThinClientOS image to the
hard disk. After it is finished, the machine must be rebooted.
Step 4b: Installing 2X ThinClientOS on a USB disk
As soon as the computer boots (without the key inserted), follow
these steps to install the image to the USB disk:
1. Choose “2X ThinClientOS Installer” using the cursor keys
and press ENTER.
2. Insert the USB disk in one of the USB ports available.
3. The installer will then scan the system for available
installation devices. The local hard disk of the machine will
be listed also.
4. Click OK on the welcome message.
5. Select the appropriate USB disk. Be careful not to select the
wrong device. Use the detected size as an indicator if the
device has been detected correctly.
6. The installer will now copy the entire 2X ThinClientOS
installation CD to the USB disk. The USB disk will function
exactly like a bootable CD but will have the ability to save
and cache data locally. After it is finished, the machine must
be rebooted.
Step 5: Configure the thin client to boot from the hard disk/USB
After you have installed 2X ThinClientOS, you must now ensure
that the thin client / computer will boot from the new disk. Go into
the computer’s BIOS and check that the boot sequence starts with
the hard disk or USB depending on which type of installation you
have just performed.
Note that the 2X ThinClientOS will automatically update itself with
Be sure to make a backup of all important data before installing 2X
ThinClientOS on both the USB and hard disk.