Specifications

132
MASTER_VOLUME=99
The default volume of the ThinClientOS volume mixer is set to
maximum due to the low output of some sound cards. This can
be set to a lower value depending on the requirements of the
administrator. The values accepted range from 0-99.
BLANK_TIME=5
This setting affects the amount of time the ThinClientOS will
wait to blank the screen as an effort to reduce screen burn
(screen saver). The amount quoted is in minutes. If you do not
want to enable the built in screen saver, you can safely omit the
option.
SKIP_VNC_PROMPT=1
When client shadowing is enabled, a prompt is displayed on
screen to notify the user that an administrator is going to switch
on the shadowing service. This is required by law in most
countries. If you want to disable the display of the prompt and
enable shadowing anyway, set the option above. Note that it’s
the responsibility of the Administrator to make sure that the
users are notified separately about the shadowing service if
need be.
MOUSE_SERIAL=1
This setting should only be set to 1 if you are using a mouse
which is plugged in through a serial port. This avoids erratic
behavior of the mouse when using serial redirection in an RDP
session