Specifications

7
Figure 2: PXE booting
2. If you have selected PXE booting OR Etherboot, the thin
client/computer will obtain the IP address of the TFTP server via
DHCP broadcasts. (In most installations the TFTP server will be
installed on the same server as 2X ThinClientServer). The thin
client will then download the 2X ThinClientOS image from the
TFTP server and proceed to boot up the thin client using that
Operating System image.
3. If you chose to boot 2X ThinClientOS from USB, CD-ROM, or
hard disk, the operating system will boot up directly from that
image without retrieving the image from the TFTP server.
Step 2: 2X ThinClientOS connects to 2X ThinClientServer
1. After 2X ThinClientOS has booted, it obtains the IP address of
2X ThinClientServer from the network settings returned by the
2X DHCP Helper Service.