Specifications

101
• A record to a DNS server
• A DNS suffix
Should you be doing a PXE install you may optionally need:
• An entry for thinsrv pointing to your 2X ThinClientServer
• An entry to the IP address of the TFTP server providing the
boot image and settings. If you are using the TFTP server
bundled with 2X ThinClientServer then the IP address is the
same as that of 2X ThinClientServer
• An entry for the path of the PXE loader called pxelinux.0
TCAC003 Unable to mount root file system read-only.
Corrupt installation; reinstall 2X ThinClientOS.
TCAC004 Unable to mount root file system read/write.
Corrupt installation, reinstall 2X ThinClientOS.
TCAC005 Unable to correct root file system errors.
Corrupt installation, reinstall 2X ThinClientOS.
TCAC006 Started in install mode however installer is not
available.
The installation package couldn’t be loaded from the Server or
CD/USB.
TCAC007 No settings were received from the 2X
ThinClientServer.
2X ThinClientOS was unable to contact the 2X ThinClientServer.
Either the 2X ThinClientServer is off, or otherwise inaccessible.
Check your firewall configuration.
2X ThinClientOS Update Error Messages
TCUP001 Unable to download latest package version.
No 2X ThinClientOS was uploaded to 2X ThinClientServer. This
can be obtained as a ZIP file from:
http://www.2x.com/downloads
Please refer to the chapter entitled “Configuring 2X
ThinClientServer”