Specifications

81 • Farm 2X VirtualDesktopServer
Figure 88 - Add 2X Backup Server
A status information message will give you guide what to do next. Usually
you’ll have to install the 2X Backup Server by clicking the ‘Install…’ button.
Then proceed with steps 3 – 5 done in the previous section. If an old version
of 2X backup server is already installed one would have to update the server
by clicking the ‘Update’ button.
Figure 89 - 2X Backup Server Properties
NOTE: The ‘Install…’ button change according to the status of the selected
server. In fact it will change to ‘Update…’ if an old version of the 2X Backup
Server is found, while it will change to ‘Take Over’ if the selected server is
already configured with a 2x Publishing Agent configured as a master server.
Modifying 2X Backup Servers
To change the properties of each backup server, select the particular server
and click ‘Properties’. One can enable or disable the selected backup server
while one can also install, update or uninstall the backup server from the
properties dialog.
To delete a particular backup server, select the required server from the
Backup Servers list and click ‘Delete’.