Specifications

2X VirtualDesktopServer Farm • 68
Gateway
In this page you may configure which port to use for 2X Client Gateway
service while you may also enable or disable RDP and Citrix services.
The 2X Client Gateway Port (default TCP 80) is used to tunnel all 2X traffic
over this port. The traffic that can be tunneled through this port include the 2X
Publishing Agent traffic (load balanced application and desktop publishing),
HTTP Server and RDP traffic. 2X Client Gateway Port is also used to tunnel
secure connections (SSL) over the same port.
The RDP Port (default TCP 3389) is used for clients who require basic load
balanced desktop sessions. Connections on this port do not support
published items.
The Citrix Port (default TCP 1494) is used for the incoming Citrix
connections which will be forwarded to the configured Citrix servers according
to the load balancing configuration. To disable this service, you may uncheck
the check box in front of ‘Citrix Port’.
Enable ‘Broadcast 2X Client Gateway Address’ checkbox to broadcast of the
2X Client Gateway address., and 2X Clients will be able to auto find their
primary server (2X Client Gateway address).
NOTE: RDP Port cannot be used if the machine on which the 2X Client
Gateway is installed has terminal services enabled.
Figure 69 - Client Gateway settings and Security settings.