Specifications

37 • Installing the 2X VDI Agent 2X VirtualDesktopServer
Figure 36 - Post-Installation status screen.
After the installation is complete (remotely or manual), you should see the ‘2X
VDI Agent’ service listed under ‘Services’ on the server where the agent has
been installed.
Figure 37 - The 2X VDI Agent Service
NOTE: The Virtual Desktop Hosts do not require configuration. The agent will
collect the information required by the 2X Publishing Agent. Subsequently,
the 2X VDI Agent will forward the necessary information to the 2X Publishing
Agent using the information collected. To ensure connectivity between 2X
Publishing Agent and the virtual host, after installing the 2X VDI Agent, go to
the Console GUI and on the ‘Virtual Desktop Hosts’ tab make sure you add all
your Virtual Desktop Hosts. Once you have finished this step, select a virtual
host (one at a time) and press the ‘Check Agent’ button. If the 2X Publishing
Agent can communicate with the 2X VDI Agent running on the Virtual
Desktop Host, you will receive this message: