Specifications

2X VirtualDesktopServer Installing the 2X Terminal Server Agent • 30
After the installation is complete (remotely or manual), you should see the ‘2X
Terminal Server Agent’ service listed under ‘Services’ on the server where the
agent has been installed.
Figure 25 -The 2X Terminal Server Agent Service
NOTE: The terminal servers do not require configuration. The agent will
collect the information required by the 2X Publishing Agent. Subsequently,
the 2X Terminal Server Agent will forward the necessary information to the 2X
Publishing Agent using the information collected. To ensure connectivity
between 2X Publishing Agent and the terminal servers, after installing the 2X
Terminal Server Agent, go to the Console GUI and on the Terminal Servers
tab make sure you add all your terminal servers. Once you have finished this
step, select a terminal server (one at a time) and press the ‘Check Agent’
button. If the 2X Publishing Agent can communicate with the 2X Terminal
Server Agent running on the terminal server, you will receive this message:
Figure 26 - Checking for 2X Terminal Server Agent on a terminal server.