Specifications

2X VirtualDesktopServer Connection Settings • 174
Logging
The Logging tab allows you to enable logging and to set the location of the
log file to be used.
You may enable logging by ticking the ‘Enable Logging’ Check Box in the
logging tab. You may also enable ‘Log Servers Performance’ and
performance counters of each load balanced server will be saved.
Then you may also set the location of the log file to be used. The Log file will
save information about the incoming connections like their originating IP
address, the terminal server that was chosen and so on.
To view the contents of the log file, click the ‘View Log…’ button and to purge
the log file click the ‘Clear Log File’ button.
Backup Log File
It is recommended to backup the log file in a compressed file. This could be
done by enabling the ‘Backup log file’ checkbox. Backup can be scheduled on
daily, weekly or monthly basis.
Please note that the backup log file will be located in the same directory of the
log file.
Figure 191 - Information Page - Enable Logging