Specifications

17 • Installing 2X VirtualDesktopServer 2X VirtualDesktopServer
A regular gateway solution is ideally used when you require a server to act as
a load balancer which will only listen for RDP and forward traffic to the MS
Terminal Server according to their load status. For this you will need to select
‘2X Publishing Agent’ and ‘2X Client Gateway’ only.
Figure 8 - Installation type – Custom (Regular Gateway scenario)
On each Terminal Server you need to install the 2X Terminal Server Agent.
This can be done by either installing the 2X Terminal Server Agents remotely
from 2X Management Console while setting up the Terminal Servers or by
manually installing it on every Terminal Server by running the same setup and
selecting ‘2X Terminal Server Agent’ only. Please refer to the chapter
entitled "
Installing the 2X Terminal Server Agent" for more information about
how to install the 2X Terminal Server Agent.