Specifications

2X VirtualDesktopServer Farm • 122
4. Click ‘Install’ after you’ve entered the administrative credentials. You
should note that service is installed successfully if the installation is
done completely.
5. Click ‘Done’ when finished.
When 2X Publishing Agent is already in use one can ‘Take Over’ the server
and use it as a backup server.
NOTE: If a 2X Publishing Agent is already in use it means that the particular
server is already configured as a master server in another farm. Taking over
this server would override any settings currently configured on the particular
machine.
One can also use the ‘Add…’ button to manually add 2X Backup Server as
shown in the figure below. After you’ve entered the name or the IP of the
server to be used as a backup server click ‘Next’.
Figure 139 - Add 2X Backup Server
A status information message will give you guide what to do next. Usually
you’ll have to install the 2X Backup Server by clicking the ‘Install…’ button.
Then proceed with steps 3 – 5 done in the previous section. If an old version
of 2X backup server is already installed one would have to update the server
by clicking the ‘Update’ button.