Specifications

2X VirtualDesktopServer Farm • 108
Figure 119 - Configure the PC's properties
Personal Computer Properties
Make sure that ‘Enable Personal Computer’ is enabled if you want the new
PC to be enabled in your Farm. Enter the name or IP of the PC you would like
to add. The default RDP port is 3389 but you can change it to match the RDP
port used by the PC.
Enter the MAC Address of the PC you would like to add. Use the ‘Get MAC’
button, in case you are adding your local machine, to easily get the MAC
Address of the machine you are using. The MAC Address is needed if you
want to use the ‘Wake on LAN’ feature when running a published PC desktop
from the 2X Client to boot up a PC that maybe switched off.
In the RDP settings you can configure the direct address by checking
‘Change Direct Address’ checkbox and type a new direct address. This
address is used in Direct Connection mode only (this is an internal or external
IP address) depending where the clients will be. If external, these IP
addresses must be assigned at your firewall to your servers).
A ‘Description’ can be given to the host which can be used to easily identify
different server from one another.
2X VirtualDesktopServer is able to ‘wake’ a PC by sending a packet of the
network. This will continue until the receipt of the packet is acknowledged or
until the connection is timed out. Choose how long the time out should take
from the ‘Connection Timeout’ drop down list.