User Guide

2N® PICard Commander
3 / 19
•
•
•
•
•
•
•
•
•
•
•
•
1. Product Overview
2N
®
PICard Commander is a software application used for the encryption of login data on
access cards. The application creates projects that generate a set of encryption and
reading
keys.
The reading keys can be imported to 2N devices or 2N
®
Access Commander for
distribution to the connected 2N devices.
The technology2N
®
PICardis designed for the encryption of MIFARE
®
DESFire
®
EV2 and MIFARE
®
DESFire
®
EV3 cards.
You can delete the uploaded access card data using 2N
®
PICard Commander.
The 2N
®
PICard Commander function is licensed.
1.1 Associated Products
Part No. 91379601
Axis Part No. 02722-001
2N
®
PICard Commander License
The license is always issued for a specific USB card
reader based on the reader Device key. Refer to 2N
®
PICard Commander for the reader Device key before
uploading the license.
See below for the supported
USB card readers.
Part No. 9137421E
Axis Part No. 01400-001
USB NFC/HCE + 13.56 MHz, 125 kHz RFID card
reader
External RFID card reader connectable to a PC via a
USB interface. Suitable for system administration and
adding of 13.56 MHz, 125 kHz cards and NFC/HCE
supporting Android platform devices using the 2N IP
intercom web interface or 2N
®
Access Commander.
Suitable for uploading of MIFARE DESFire cards into
the 2N
®
PICard Commander encryption application
1
.
It reads the
same types of cards and devices as card
readers in 2N IP intercoms:
125 kHz
EM4xxx
13.56 MHz
ISO14443A (MIFARE DESFire)
PicoPass (HID iClass)
FeliCa
ST SR(IX)
2N
®
Mobile Key