Manual 2N Mobility Extension Symbian 2N TELEKOMUNIKACE a.s., Modranska 621,143 01 Praha 4 Phone: +420 261 301 500, Fax: +420 261 301 599, e-mail: sales@2n.
The 2N Mobility Extension application enables mobile telephone users to make calls over a PBX or a GSM gateway from 2N TELEKOMUNIKACE a.s. When calling a contact in a phone directory this application automatically calls to the PBX and then dials the contact. Thus the application not only makes it easier to call but also brings savings on calls.
Settings After successfully installing the “2N Mobility Extension – ME” will be among your applications. Mobility Extension On the first run you will be familiarised with the application’s conditions and basic properties. The application is licensed but contains a ten-day trial licence. To get the license key please contact sales@2n.cz, then enter it into the Licence menu. It is now necessary to set the SIM card number in the PBX that the application will communicate with. Options -> Settings.
Main menu The great advantage of this application is its simplicity and user friendliness. To get into the main menu press Options. Main menu Main menu Contacts – enables a number to be called directly from your telephone directory. Call – enables a dialled number to be called manually. Profile – to set a specific profile. Mobile Ext – turns on/off calling to the station (ME). Call Transfer – enables call forwarding to be set (including redirecting to Voicemail).
Incoming call There are the following options with incoming calls: Hold – puts an incoming call on hold. Resume – takes you back to the caller. Call Transfer – puts a caller on hold and enables you to switch to a number from the telephone directory. Send DTMF – enables a call to be switched to a number entered by you (manually). Exit – deactivates the application. Options Mobility Extension Call Forwarding Logging in/out Absence message Call Transfer 2N TELEKOMUNIKACE a.s.
Tested telephones Currently the following phones have been tested: N73, N78, N82, N91, N92,N93, N93i, N95, N96, E50, E51, E60, E61, E61i, E65, E66, E70, E71 a E90 An up-to-date list can be found at www.2n.cz. Advanced settings Advanced settings can be made in the afore-mentioned Aina.bin file. The file has these parameters: PBX +420739586586 – Access number (mostly SIM) in your PBX. PBX2 +420739586587 – Access number in case the SIM is busy. You can define up to 8 numbers.
CodeTfrBusy *12 – Service code for „Forward user - busy“. CodeTfrDelay *13 – Service code for „Forward user – no answer“. CodeTfrOff #10 – Service code for „Cancel all user forward“. CodeTfrImmedVM*31 – Service code for „Forward to VM - unconditional“. CodeTfrBusyVM *32 – Service code for „Forward to VM - busy“. CodeTfrDelayVM *33 – Service code for „Forward to VM – no answer“. CodeTfrOffVM #30 – Service code for „Cancel forward to VM - all“. CodeTfrDuring 7* – Service code for Call Transfer.
2N TELEKOMUNIKACE a.s., Modranska 621,143 01 Praha 4 Phone: +420 261 301 500, Fax: +420 261 301 599, e-mail: sales@2n.
