® 2N Helios IP Uni Door Access Intercom Installation Manual Version: 1.0.0 www.2n.
The 2N TELEKOMUNIKACE a.s. joint-stock company is a Czech manufacturer and supplier of telecommunications equipment. The product family developed by 2N TELEKOMUNIKACE a.s. includes intercoms, GSM and UMTS products, private branch exchanges (PBXs) and M2M solution. 2N TELEKOMUNIKACE a.s. has been ranked among the Czech top companies for years and represents a symbol of prosperity in the field of IP intercoms.
Contents 1. Product Overview............................................................... 5 1.1 Product Description ....................................................................................................... 6 Basic Features.................................................................................................................. 6 Advantages of Use ........................................................................................................... 7 1.2 Upgrade ..............
. Technical Parameters ...................................................... 27 4.1 Technical Parameters .................................................................................................. 29 5. Supplementary Information ............................................ 30 5.1 Directives, Laws and Regulations .............................................................................. 31 5.2 Troubleshooting ..................................................................................
1 1. Product Overview In this section, we introduce the 2N® Helios IP Uni product, outline its application options and highlight the advantages following from its use.
Product Description 1.1 1.1 Product Description Basic Features 2N® Helios IP Uni is a highly resistant and reliable IP door access intercom provided with a lot of useful above-standard functions. Supporting the SIP standard and being compatible with the leading IP PBX and telephone suppliers, 2N® Helios IP Uni can make use of all VoIP services.
Product Description 1.1 Advantages of Use Variable mounting options (brick/plasterboard flush mounting, wall mounting) Sensitive microphone and powerful loudspeaker Bidirectional communication – acoustic echo cancelling Optional dial buttons including name tags and backlight Integrated electronic lock switches with wide setting options LAN (PoE) or external 12V power supply Configuration via web interface or dedicated PC application SIP 2.
Upgrade 1.2 1.2 Upgrade The manufacturer reserves the right to modify the product in order to improve its qualities.
2N® Helios IP Uni Components and Associated Products 1.3 1.3 2N® Helios IP Uni Components and Associated Products Basic Units 9153101 9153102 2N® Helios IP Uni is designed for outdoor applications and requires no additional roof. All 2N® Helios IP Uni units can be flush mounted without requiring any additional accessories. Use the appropriate mounting box (see below) for wall (surface) mounting.
2N® Helios IP Uni Components and Associated Products 1.
2N® Helios IP Uni Components and Associated Products 1.3 VoIP Connection Accessories 91378100 91378300 91378350 PoE injector Grandstream VoIP telephone Grandstream VoIP video telephone Electric Locks 932070 932080 932090 BEFO 1211 12V / 600 mA BEFO 1221 with momentary pin BEFO 1211MB with mechanical blocking Other Accessories 91341481E 932928E 9137410E 12 V/2 A adapter 12 V transformer External IP relay A stabilised power supply must be used where PoE supply is not applied.
Terms and Symbols 1.4 1.4 Terms and Symbols Symbols Safety Warning Always abide by this information to prevent injury of persons! Warning Always abide by this information to prevent damage to the device. Caution Important information for system functionality. Tip Useful advice. Note Additional information.
2 2. Description and Installation In this section we describe the 2N® Helios IP Uni product and its installation.
Before You Start 2.1 2.
Mechanical Installation 2.2 2.2 Mechanical Installation Mountiong Type Overview Refer to the table below for a list of mounting types and necessary components. Flush mounting – classic bricks (also hollow bricks, thermally insulated walls, etc.) What you need: A properly cut hole Plaster, mounting glue, mounting foam or mortar as necessary Flush mounting – plasterboard What you need: Just a properly curt hole Wall mounting (concrete and steel structures, entry barrier columns, etc.
Mechanical Installation 2.2 Caution The warranty does not apply to the product defects and failures arisen as a result of improper mounting (in contradiction herewith). The manufacturer is neither liable for damage caused by theft within an area that is accessible after the attached electric lock is switched. The product is not designed as a burglar protection device except when used in combination with a standard lock, which has the security function.
Mechanical Installation 2.2 Flush Mounting – Classic Bricks 1. Cut a wall hole using the template enclosed. Make sure that all the required cables are available in the hole. 2. Unpack the plastic mounting box. Break out the cable holes as necessary and make sure that the wall hole is big enough for the box. 3. Wall up the mounting box making sure that the box is aligned with the wall surface. Wait until the plaster (mortar, mounting foam, etc.) sets. 4. Unscrew the front panel from the door intercom. 5.
Mechanical Installation 2.2 Flush Mounting – Plasterboard Tip If this is your first plasterboard installation, check the function of the intercom side clamps. Loosen and then re-tighten the clamp screw to see how it turns automatically and starts moving forwards in its slot. Remember to return the clamp into the original position after the check! Caution Check the plasterboard wall and room interior pressure values (caused, e.g., by overpressure ventilation).
Electric Installation 2.3 2.3 Electric Installation This subsection describes how to connect 2N® Helios IP Uni into your Local Area Network (LAN) and how to connect supply voltage and the electric lock.
Electric Installation 2.3 LAN Connection 2N® Helios IP Uni is connected to the LAN via a RJ-45 terminated (connector X11) UTP/STP cable (of category Cat 5e or higher). The system is equipped with the AutoMDIX function and so both the straight and crossed cable versions can be used External Power Supply Connection 2N® Helios IP Uni can be fed either from an external 12V/1A DC power supply or from the LAN equipped with the PoE 802.3af supporting network elements.
Button Tags – Insertion and Replacement 2.4 2.4 Button Tags – Insertion and Replacement Tag Printing 1. Every name plate includes a piece of foil, which can be written over manually, using a waterproof permanent marker. Note Always use waterproof foil (enclosed or other) for the tags. Never use paper or ink jet printing to avoid damage due to water leakage! Tag Inserting / Replacing 2N® Helios IP Uni provides an intuitive, easy access to the name plates.
3 3. Function and Use In this section we describe the basic and extending functions of the 2N® Helios IP Uni product.
2N® Helios IP Uni Configuration 3.1 3.1 2N® Helios IP Uni Configuration 2N® Helios IP Uni Use a PC equipped with any web browser to configure: Launch your web browser (Internet Explorer, Firefox, etc.). Enter the IP address of your intercom (http://192.168.1.100/, e.g.). Log in using the Admin user name and 2n password. You have to know the IP address of your device to log in to the integrated web server. By default, 2N® Helios IP Uni is switched into the dynamic IP address mode, i.e.
2N® Helios IP Uni Control 3.2 3.2 2N® Helios IP Uni Control This subsection describes how to control 2N® Helios IP Uni when viewed by an external user. Speed Dial Buttons Press the speed dial buttons on the basic unit to make quick dialling for the first 1 or 2 (depending on the model type) in the telephone directory. Call setup is signalled by a long intermittent tone or otherwise as configured in the PBX connected.
Maintenance 3.3 3.3 Maintenance Cleaning If used frequently, 2N® Helios IP Uni gets dirty. To clean it, use a piece of soft cloth moistened with clean water. We recommend you to obey the following principles while cleaning: Never use aggressive detergents (such as abrasives or strong disinfectants). Alcohol-based cleaners may be applied. Clean the device in dry weather in order to make waste water evaporate quickly.
4 4. Technical Parameters In this section we describe the technical parameters of the 2N® Helios IP Uni product.
4.1 Technical Parameters Signalling protocol SIP (UDP) Buttons Button design Transparent, white backlit buttons with easily replaceable name tags Button count 1 or 2 Microphone 1 integrated microphone Amplifier 1W (class D) Loudspeaker 1W Audio Volume control Adjustable with automatic adaptive mode Full duplex Yes (AEC) Audio stream Protocols RTP/RTSP Codecs G.711 Interfaces Power supply 12V+-15%/1A DC or PoE PoE PoE 802.3af (Class 0 - 12.
5 5. Supplementary Information This section provides supplementary information on the 2N® Helios IP Uni product.
Directives, Laws and Regulations 5.1 5.
Troubleshooting 5.2 5.2 Troubleshooting For tips concerning solutions of other potential problems see faq.2n.cz.
General Instructions and Cautions 5.3 5.3 General Instructions and Cautions Please read this User Manual carefully before using the product. Follow all instructions and recommendations included herein. Any use of the product that is in contradiction with the instructions provided herein may result in malfunction, damage or destruction of the product.
General Instructions and Cautions 5.3 Electric Waste and Used Battery Pack Handling Do not place used electric devices and battery packs into municipal waste containers. An undue disposal thereof might impair the environment! Deliver your expired electric appliances and battery packs removed from them to dedicated dumpsites or containers or give them back to the dealer or manufacturer for environmental-friendly disposal.
2N TELEKOMUNIKACE a.s. Modřanská 621, 143 01 Prague 4, Czech Republic Tel.: +420 261 301 500, Fax: +420 261 301 599 E-mail: sales@2n.cz Web: www.2n.cz DR1812v1.
