User Manual

Full Parameter Chart

3.2

Explanation of Some Parameters

824 - Second Switch Synchronisation

Set the parameter to a non-zero value to make switch 2 activate automatically with a

defined delay if switch 1 is activated. Useful where two doors are close to each other.

(The numbers in the figure are parameter numbers.)

The parameters can be set to overlap activation of the two switches:

Explanation of Parameters 951, 952, 953

Ringing tone (example)

SWITCH 1

SWITCH 2

SWITCH 1

SWITCH 2

Long pause

At this time Helios detects,

that ringing tone had ended.

Ringing tone

Par.

952

Par. 953