Manual

622N TELEKOMUNIKACE a.s., www.2n.cz
®
BRI1 alerts
Still activated ISDN layer 1 – enable/disable keeping of ISDN layer 1 active.
Still activated ISDN layer 2 (SABME/UA) – enable/disable keeping of ISDN layer
2 active.
Send SMS at state changes – enable/disable alert sending upon BRI1 state
change.
BRI2 alerts
Still activated ISDN layer 1 – enable/disable keeping of ISDN layer 1 active.
Still activated ISDN layer 2 (SABME/UA) – enable/disable keeping of ISDN layer 2
active.
Send SMS at state changes – enable/disable alert sending upon BRI1 state
change.
BRI common settings
Timeout for ISDN line deactivation detection [s] – an SMS alert on BRI1/BRI2
deactivation is sent after this timemout.
Timeout for ISDN line activation detection [s] – an SMS alert on BRI1/BRI2
activation is sent after this timeout.
Numbers where SMS will be sent to – list of numbers to which the SMS alert shall
be sent.
Text of SMS – SMS alert text with the following parameters:
%P(x|y), where "x" represents any text concerning BRI1 and "y"
represents any text concerning BRI2.
%A(x|y), where "x" represents any text for interface deactivation and "y"
represents any text for interface activation.
Settings of Alive SMS interval
Send Alive SMS – enable/disable sending of ALIVE SMS.
Time [hh:mm] – ALIVE SMS sending time.
Days interval – ALIVE SMS sending interval.
Numbers where SMS will be sent to – list of numbers to which the ALIVE SMS
shall be sent.
Text of SMS – ALIVE SMS text.
GSM Basic Parameters
Number of digits dialled from VoIP
Minimum numbers from VoIP – set the minimum count of digits to be dialled into
the GSM network.
Maximum numbers from VoIP – set the maximum count of digits to be dialled
into the GSM network.
Wait for next digit [s] – set the timeout for gateway to wait for the2N BRI
®
next digit dialled from VoIP to GSM.