Manual

362N TELEKOMUNIKACE a.s., www.2n.cz
®
Figure 4: Quick Call Forwarding Function
Correct ME configuration
Connect the GSM gateway to your PBX/SIP Proxy.
Check whether the licence key has been entered2N Mobility Extension
®
correctly.
Enter all ME users in the menu.Gateway configuration / Mobility Extension
Enter the prefix matching the ME user mobile number in the Gateway
menu.configuration prefixes/
LCR Table
The LCR (Least Cost Routing) table is the key telephone cost cutting tool. It helps you
select call routes according to the called subscriber’s number, daytime and weekdays.
By adding bank holidays (with routing rules as on Sundays) to the LCR table you
achieve even higher call cost savings.
To make your prefix and LCR routing work properly, enter the prefix of the number to
be called to the GSM/UMTS network into the in the Table of accepted prefixes
menu. The number to be called may not exceedGateway configuration Prefixes/
the or the higher priority setting in the Default count of digits Count of digits Table
. The table is searched from top to bottom starting with the firstof accepted prefixes
match.
Apply the to modify the number to be called to theTable of replaced prefixes
GSM/UMTS network. Every modification is displayed in the f"prefix"/"replace with"
ormat (99/+420, e.g.). The must always contain oneTable of replaced prefixes
record at least or the record if no prefix modification is made. The digits removed"/"
from/added to the number in the are not included in the Table of replaced prefixes
. The table is searched from top to bottom starting with the firstCount of digits
match.
GSM network ID is an optional parameter, which is assigned to each LCR record to
make the LCR search more convenient. If this parameter is not completed, the list
number is only used for identification (1-8).