Manual

212N TELEKOMUNIKACE a.s., www.2n.cz
®
RJ-45 LAN Connector
NT and TE Connectors
ISDN devices are connected to the NT/TE connectors depending on the configuration of
your telecommunications equipment. They are connected via a 4-wire passive bus with
the aid of RJ-45 connectors. Refer to the figure below for the NT/TE connector pin
lay-out.
TE connector The figure below shows connected as2N BRI Enterprise / BRI Lite
®
network termination (NT) – extension for your ISDN PBX or ISDN phone, i.e. your own
equipment.