Manualshelf

User Manual

ManualsBrands2N ManualsAccessories communicationBRI Lite/Enterprise v1.7
51525354555657585960
532N TELEKOMUNIKACE a.s., www.2n.cz
®
Voice Messages
This window is used for recording, checking and downloading voice
messages. Supported format is PCM–Alaw, Mono, 8000 Hz, 8 bits.
Index Type of message Use Max. length(s)
0 DISA message Inc. calls from GSM/UMTS 64
1 ME"Hallo" Mobility Extension calls 4
2 ME"Mobility extension" Mobility Extension calls 4
3 ME"Please dial number" Mobility Extension calls 4
4 ME"Text message" Mobility Extension calls 4
5 ME"Activated" Mobility Extension calls 4
6 ME"Deactivated" Mobility Extension calls 4
7 ME"beeep" Mobility Extension calls 4
8 ME"be,be,be" Mobility Extension calls 4
21 GSM outgoing group 1 Calls via Out. GSM group 1 8
22 GSM outgoing group 2 Calls via Out. GSM group 2 8
23 GSM outgoing group 3 Calls via Out. GSM group 3 8
24 GSM outgoing group 4 Calls via Out. GSM group 4 8
25 GSM outgoing group 5 Calls via Out. GSM group 5 8
26 GSM outgoing group 6 Calls via Out. GSM group 6 8
27 GSM outgoing group 7 Calls via Out. GSM group 7 8
28 GSM outgoing group 8 Calls via Out. GSM group 8 8
30 Message 30 Voice message detector 8
31 Message 31 Voice message detector 8
32 Message 32 Voice message detector 8
33 Message 33 Voice message detector 8
34 Message 34 Voice message detector 8
35 Message 35 Voice message detector 8
36 Message 36 Voice message detector 8
37 Message 37 Voice message detector 8
You can choose which message will be uploaded or use detection by file
name. Detection requires file name: "mess[index of message][optional
remark].wav". You can upload more than one message in .tar file.
LOG file
The LOG file helps you read out the gateway LOG file. There are LOG file saving and
LOG listing updating icons in the lower part of the window.
Note
Voice messages with indexes 30 – 37 are used for detection of the mobile
provider's voice message played before call connection. If a match is
found of the voice message with any of the voice messages recorded in
the gateway, the call is terminated automatically or established via the
last GSM outgoing group set in the LCR table (on condition that the ITD –
Ignore tone detection in last group parameter is active) in the Gateway
section. Refer to theConfiguration LCR table Gateway Configuration
for details. GSM basic parameters Voice message detector settings