Manual

752N TELEKOMUNIKACE a.s., www.2n.cz
®
Caution
The count of user accounts is file-licensed. Refer to
for the current GSM gateway licenceManagement–>Licence key
details.
Users
This section helps you manage the SMS users. Select a communication protocol for
user adding (SMTP/POP3 or SMPP).
Add user
– User group assign the user to a User group.
–User full name define the system user name.
– Replace dial for outgoing SMS define the number (CPN) to which the
user's outgoing SMS messages shall be sent.
– Access type select the communication protocol for SMS processing:
Email (SMTP/POP3) – use SMTP for SMS sending and POP3 for
SMS receiving.
SMPP (SMSC) – set the GSM gateway into the 'SMS centre' mode.
SMPP (ESME) – set the GSM gateway into the 'ESME - External
Short Messaging Entity' mode.
Login name (without domain) – define the login name for the client
Email.
System ID – SMSC user .ID
Password – SMSC/SMTP user password.
– System ID (for authentication on remote side) ESME user ID.
– Password (for authentication on remote side) ESME user ID.
set the TCP parameter into the client/server mode.TCP type –
Server address – set the server IP address and TCP server transport
port.
Message direction of Esme – set the ESME user details:
Transceiver – ESME works as a transmistter/receiver.
Transmitter – ESME works as a transmitter.
Receiver – ESME works as a receiver.
Address range – set this parameter if required so by SMSC for SMS
receiving.