Manual

1142N TELEKOMUNIKACE a.s., www.2n.cz
®
6.5 LOG Files
Description of the table:
Type Text Description
POWER [Power on] System switched on
[Power off] System switched off
[Warm boot] Restart of system, unknown cause
[Watchdog] Restart of system by watchdog
[BKPT code] CPU error: break code detected
[Stack error] CPU error: stock integrity failure
[Divided by
zero]
CPU error: dividing by zero
[RETI code] CPU error: illegal using of instruction reti
[NMI intr] CPU error: wrong interrupt
[VOID intr] CPU error: wrong interrupt
[Upgrade reset] Start of upgrade firmware procedure
[Software
reset]
Reset by AT commands (at&fres…)
INIT Eeprom Initialisation of eeprom (configuration)
Flash Initialization of flash memory (firmware)
HW–ERR
(##…address of chip, RD…read value/WR…expected
value)
Duart
#####,RD/WR
Error in initialization of serial controller on GSM board
SYSERR
User stack
error!
SW error: stock integrity failure
BRDIN #08 TYP STS the board inserted (number of gsm board, type, status)
BRDOUT #08 TYP STS the board disconnected
BRDRES #08 TYP STS Reset the board by AT command