Owner manual

63
Summer / winter time
 Automatically move to summer/winter time  enable automatic GSM gateway
system time change for winter/summer time format transition.
 Date of move to winter time [dd.mm]  specify the day and month for the
change.
 Date of move to summer time [dd.mm]  specify the day and month for the
change.
Mobility Extension (DTMF settings)
 Start dialling (quick call forwarding)  set the DTMF code for quick call
forwarding start.
 End dialling (quick call forwarding)  set the DTMF code for quick call
forwarding end.
 Hold call  set the DTMF code for the current call holding.
 Hang up call  set the DTMF code for the current call termination.
 Follow me activation  activate the Follow me function to make the GSM
gateway start routing calls to the defined GSM/UMTS user number. The
default value is *55.
 Follow me deactivation  deactivate the Follow me function. The default
value is #55.
 SMS at no answer activation  activate the SMS at no answer function for a
registered user. The default value is *33.
 SMS at no answer deactivation - deactivate the SMS at no answer function
for a registered user. The default value is #33.
Tip
 Activate/deactivate the SMS at no answer and Follow me functions by
dialling the above mentioned DTMF access codes into the GSM gateway
from a registered mobile user number. You can change the function values
via the configuration interface too (see below).
Others
 PIN  set the PIN code for the PIN-secured SIM cards.
Caution
 A PIN-active SIM card with a PIN value other than that set in the GSM
gateway configuration will be blocked by the pin-err
cause. Enter the correct PIN on your mobile phone to unlock the SIM card!
 End of dialling (empty=off)  set the DTMF code for DTMF dialling end for
DISA incoming calls. The default value is 