Owner manual

60
Gateway Control
Gateway control helps you:
 Monitor the current state of each GSM gateway parts;
 Check and set the GSM gateway licence;
 View and save the LOG file and CDR.
Firmware / Licence
Use this window to display information on the gateway licence status, firmware
and bootware versions and Ethernet interface MAC address. You can enter a new
licence code here.
 Firmware version  displays the current firmware version for the GSM
gateway connected.
 Bootware version  displays the current bootware version for the GSM
gateway connected.
 MAC address  shows the MAC address of the GSM gateway Ethernet
interface.
 CPU serial number  shows the GSM gateway serial number in the M203-
xxxxxxxxxx.bin format.
 Active  protocols allowed by the licence:
o SIP - SIP support;
o MExx - Mobility Extension support, where xx means the maximum
count of users;
o G729 - G.729ab voice codec support;
o DSS1 - ISDN BRI DSS1 protocol support;
o TUN - GSM-CSD remote supervision support.
 Gateway limitation  displays the gateway operation limit (or licence
limitation).
 Licence status  displays the current licence status (unlocked/locked).
Caution
 When the licence code expires, the licence-based protocols will be locked!
 Networks  displays the list of allowed/disallowed GSM/UMTS networks.
Tip
 
types of GSM/UMTS networks. This state is signalled by a red LED Ch 1/Ch
2 -.
 Contact your dealer please for more information.