Manual

Product Description

1.1

1.1 Product Description

Basic Features

n The primary purpose of 2N® SmartGate UMTS is to transmit voice between

UMTS/GSM network and attached phone terminals. You can connect terminal

with FXO interface (trunk line of PBX, phone set, answering machine etc.) to

FXS interface on 2N® SmartGate UMTS (connector with phone icon) and

terminal with FXS interface (extension line of PBX) to FXO interface on 2N®

SmartGate UMTS (connector with crossed out phone icon).

n You can establish data connections (HSPA, UMTS, EDGE, GPRS, CSD) and

send/receive SMS using 2N® SmartGate UMTS in combination with a PC and

appropriate software.

n You can send an SMS to a pre-programmed number using the SMS sending

input.

n Version of SmartGate UMTS with Battery backup allows the function in case of

power failure.

Advantages of 2N® SmartGate UMTS use

n Call cost cutting – the calls are routed to UMTS/GSM or analog network

according to their number prefix. Route all UMTS/GSM calls from PBX to 2N®

SmartGate UMTS to save a lot on PSTN – UMTS/GSM calls.

n Easy installation – you can easy program 2N® SmartGate UMTS as you

need with enclosed SW.

n You get all you need in the delivery – your 2N® SmartGate UMTS delivery

contains all you need to operate the system (the power supply adapter,

telephone cables, PC serial cable, SMS input connector, CD-ROM with

software).

n Solution for sites without telephone lines – such as mountain chalets,

exhibitions, conferences, etc.

n DialThru technology – all your calls will be routed most cost-effective way.

n ME – Mobility Extension – you newer miss an incoming call from analog

network. Incoming call will ring on connected phone and on your mobile

phone too.

n CLIP - 2N® SmartGate UMTS is equipped with the FSK-based CLIP feature,

so if a terminal capable of receiving the CLIP is used you know the caller‘s

number.

n SMS sending input – simply send an SMS to a pre-programmed number by

closing the contact. Recommended for easy supervision, simple securing, etc.

n Radiation hazard minimization – you are not exposed to a direct effect of

the antenna RF electromagnetic field while telephoning as opposed to mobile

telephones.