Manual

Data connection using USB 4.3
63
4.3 Data connection using USB
2N
®
SmartGate UMTS can be used as high speed wireless modem to connect your PC
to internet. Technology HSDPA, UMTS. EDGE or GPRS are supported.
Connection to internet–Sierra Wireless module version
For Internet connection management is used program AirCard Watcher.
Internet connection setting
1. Install program ‘Watcher_Generic_B2849.msi’ from CD.
Note
n In some versions of Windows 7 is known bug, when runtime error
connected with VBscript occurs, the bug must be fixed. Use Microsoft
patch ‘RegisterWindowsScriptEngine.msi’, which is included on CD.
2. Connect 2N
®
SmartGate UMTS k PC using USB cable to PC ant switch it on.
3. The drivers will be installed automatically and the program AirCard Watcher
starts.
4. Use button Connect for connection to internet. For the first run you will be
asked to set profile for connection.
5. For profile setting you have to fill the name of profile and the Access point
name – APN (e.g ‘internet’). For some providers is necessary to set Username
and Password. All this information are to be obtained from you internet
provider.
SMS Express
Setting
Provider