User Manual, v1.00 Instruction Manual

1. EasyGate UMTS Data purpose

1.1. Basic Functions

• The primary purpose of EasyGate UMTS Data is to transmit voice between a UMTS

or GSM network and an attached FXO-interface terminal (PBX, telephone,

answering machine, etc.).

• You can establish fast internet HSDPA connection or GPRS connection.

• You can send an SMS to a pre-programmed number using the SMS sending input.

• EasyGate UMTS Data can’t establish data/fax connections!

1.2. Advantages of EasyGate UMTS Data Use

• Call cost cutting – by forwarding UMTS/GSM calls to EasyGate UMTS Data you save

a lot on PSTN – UMTS/GSM calls.

• Easy installation – EasyGate UMTS Data is designed for immediate use without

programming.

• You get all you need in the delivery – your EasyGate UMTS Data delivery contains

all you need to operate the system (the power supply adapter, telephone cable, PC

serial cable and CD-ROM with software).

• Solution for sites without telephone lines – such as mountain chalets, exhibitions,

conferences, etc.

• CLIP - EasyGate UMTS Data is equipped with the FSK-based CLIP feature, so if a

terminal capable of receiving the CLIP is used you know the caller‘s number.

• Fast internet connection – EasyGate uses HSDPA for internet connection (max

speed 7.2 Mbit/s). HSDPA connection and voice calls can run simultaneously on

gateway

• SMS sending input – simply send an SMS to a pre-programmed number by closing

the contact. Recommended for easy supervision, simple securing, etc.

• Radiation hazard minimization – you are not exposed to a direct effect of the

antenna RF electromagnetic field while telephoning as opposed to mobile telephones.

• Full UMTS/GSM coverage – UMTS 2100MHz and GSM 850/900/1800/1900MHz.