User Manual, v1.00 Instruction Manual

None -EasyGate doesn't send tariff pulse as signaling of call

start/end.

Call end -EasyGate sends tariff pulse when call ends.

Call start -EasyGate sends tariff pulse when call starts.

Call start and end -EasyGate sends tariff pulse when call starts and

ends too.

Default setting: None

Tariff pulse frequency Function No.: -

Tariff pulse frequency setting.

Setting options:

16 kHz -EasyGate transmits 16 kHz tariff pulses

12 kHz -EasyGate transmits 12 kHz tariff pulses

Default setting: 16 kHz

8.3.1.3 Tone settings

Dial tone – Double frequency tone[Hz] Function No.: -

Set for double frequency tones

Setting options: YES/NO

Default setting: NO

Dial tone – frequency [Hz] Function No.: -

Setting of frequency/frequencies of dial tone.

Setting options: 5-1275 Hz

Setting step: 5 Hz

Default setting: 425 Hz

Dial tone - cadence Function No.: -

This tone is generated after Off-Hook in case EasyGate is ready to accept

dialing.

Setting options:

Continuous -EasyGate generate continuous dial tone

Morse A -EasyGate generate dial tone with 320/320/640/640 ms

cadence

Default setting: Continuous

Busy tone – Double frequency tone[Hz] Function No.: -