User Manual, v1.00 Instruction Manual

9
3. EasyGate UMTS Data Status Indication
3.1. Indication LEDs
Name Meaning
Power supply
• Light = EasyGate UMTS Data is powered.
• Flashes once in 2s = HW error, contact the manufacturer.
UMTS/GSM
network
• Light = registered to UMTS/GSM
• Flashes once in 1s = not registered, USIM card inserted
• Flashes once in 3s = not registered, USIM card not
inserted
• Flashes 4 times quickly = enter your PIN
• Flashes 8 times quickly = enter your PUK
• Flashes quickly continuously = all functions are blocked.
Your USIM doesn’t correspond to the operator lock
Telephone line
•
No light = standby
• Flashes quickly = seized line or ringing
• Light = call
3.2. Telephone Line Tones
3.2.1. Operational Tones
EasyGate UMTS Data sends tones to the telephone line to indicate the line status.
Dial tone: continuous or Morse A :
• EasyGate UMTS Data is registered to UMTS/GSM network and ready to receive
dialing.
Ringing tone:
• The called subscriber's telephone is ringing.
• The UMTS/GSM network transmits this tone.
Busy tone:
§ The busy tone is transmitted in any of the following cases:
§ The USIM card has not been installed.
§ EasyGate UMTS Data is logged-out.
§ EasyGate UMTS Data is logged-in to a foreign network but roaming is
disabled.
§ The called number has too many digits (more than 30).
§ The called number is barred.
§ The called subscriber line is busy.
§ The called subscriber has hung up (disconnection).