User's Manual

Signal Flow and Routing Options
66
Situation 2 – Live 1: Mix for the PA, click and monitor signal on the headphones
In this setup, you want to output the drum signals and songs as a stereo mix. At the same time you want
to use the DrumIt Three as "in-ear monitor station" (stereo mix, metronome, external monitor signal).
For this, you connect the output jacks OUT1·2 of the DrumIt Three with an external mixer and
simultaneously the monitor output of the mixer (Aux) with the line-in jack of the DrumIt Three module.
On the headphone output are now the signals of the DrumIt Three (drum channels, metronome, song
player) plus the external monitor signal (e.g. vocals, bass, guitar).
For the stereo output, use the SUB mix. So that neither the signal of the metronome nor of the line-in
channel are in the stereo sum, the respective sub-groups are switched off (see also page 55).
KICK
SNARE
HIHAT
TOMS
CYMB
PERC
LINE
SONG
METR
Output
OUT1
x
x
x
x
x
x
x
OUT2
x
x
x
x
x
x
x
Phones
x
x
x
x
x
x
x
x
x
The output jacks OUT1·2 get only the
SUB-mix (with no line-in and metronome).
The headphone jack is fed with the
complete mix (internal mixer).