User's Manual

UNIT Mode

9.11 UNIT – PREF

SAVE This parameter determines whether changes in the modes KIT and UNIT can be saved

or not. Select "On", to be able to save your results permanently after successful

programming by pressing the left DATA button. The saving process is executed on the

main page of the modes (KIT Page PROG or UNIT Page MIX). As soon as something is

changed in the original settings, this is indicated by a„?“ displayed to the right of SAVE.

In the off mode, your changes will not be saved.

SAVE-Off Mode

The SAVE-off mode is particularly useful when several percussionists play on your DrumIt

Three (e.g. at a festival) and you want to prevent people from tampering with your drum kits

and configurations and then saving that.

TRIG Here you can set the volume at which the sounds will be played back when pressing the

TRIG button - i.e. when prelistening. The available range extends from -48 to 0 dB

(default -6 dB). You can turn off the prelisten function of the TRIG button as well. Just

select "off".

INIT↓ This function resets the DrumIt-Three-Module to factory default. Rotate the DATA

controller to select the part you want to reset. After selecting the desired value, press the

DATA controller ↓ while you hold the MORE button.

There are various options available.

Unit resets all settings of the mode UNIT

Kit1 bis 100 only resets the settings of the selected KIT

KtPrg resets the order of the KITs to factory default

All resets all KITs and the order of the KITs to factory default