User's Manual

UNIT Mode
57
9.9 UNIT – METR
On this page you can change the sound settings of the metronome. Please note that these are global
settings that affect all KITs.
FILE
↓
Like on the DRUM Page in the KIT menu, you can select a sound by rotating the DATA
controller. Pressing the DATA controller and holding the MORE button switches to
FOLD
↑
and you can navigate through the folder structure. The first line of the display
shows the folder, the second line, as usual, the name of the sound.
TUNE

TUNE changes the pitch of the sound. The lowest pitch is at -12. The highest achievable
pitch is dependent on the selected sound. Four half-steps up (+4) are common. But there
are sounds that can be changed even more or less than 4 half steps up. If you press the
controller while you hold the MORE button, you switch into a fine-tuning mode and you
can adjust the pitch in decimals.
DECAY This value determines how long the underlying sample of the sound will be played back.
With the setting ∞ (infinity), the whole sample will be played back. Turn the controller to
the left to shorten the sound. In practice, it is recommendable to shorten the sound length
using DECAY in order to generate a clearly audible and precise click.
With the DATA buttons you can listen to the various zones of the selected sounds. Please note that only
the first zone (left DATA button) can be used as a metronome sound.