User's Manual

UNIT Mode
52
9.7 UNIT – INTF*
On this page you make the global routing and MIDI settings for each trigger channel. Here you set to which
BUS the respective signals should be sent and the settings for the MIDI control of each channel.
Application examples expanding on this topic can be found from page 63 on.
ZONES Here you can see how many (sound) zones are assigned to a trigger channel. The
number of zones indicates how many MIDI notes are used for the channel. Please note
that for all trigger channels with multiple zones the MIDI notes are a consecutive
sequence that can be shifted, but not separated from each other.
example:
Cymbal 2 has 4 zones and has B4 assigned as MIDI note. Therefore, the MIDI note
sequence for the cymbal 2 is:
B4 = bell, C5 = bow, C#5 = edge, D5 = choke function.
FADER Select here to which FADER group of the internal mixer (see also mode UNIT Page MIX
on page 41 the respective trigger channel should be assigned. Please note that for this
purpose only the first six FADER groups are eligible, the assignment of the groups LINE,
ACMP is fixed.
CHAN This sets the MIDI channel for the transmitting or receiving of MIDI signals for the
respective drum channel. You can assign a different MIDI channel (1 to 16) to each drum
channel. The default setting for all channels is the global MIDI channel (see also menu
item MIDI on page 58). This channel is marked with "!" and can be set manually. To do
this, turn the DATA controller to the far right.