User's Manual

Saving Your Settings
23
8 Saving Your Settings
Any changes you make can be saved internally.
Important: Your settings can only be saved after unlocking the SAVE function in the UNIT-PREF menu
(you only need to do so once). Press the leftmost DATA button to switch the SAVE function
“On”.
Saving one KIT
Changes you wish to keep after editing the settings on a KIT page require that you save the KIT in
question.
If the settings of selected KIT no longer correspond to the stored version, a “?” symbol appears next to
SAVE on the KIT home page.
Press the leftmost DATA button above the display.
Pressing the button above SAVE yet again will write your changes to the selected KIT.
Renaming a KIT
To rename a KIT, press the button above SAVE on the KIT home page.