User's Manual

Menu Structure
22
KIT Menu
The KIT menu allows you to manage and edit the internal memory slots. The module comes with 100
factory KITs (memory slots). Those KITs can be edited and overwritten with your own settings.
The KIT menu allows you to assign the desired sounds to the selected KIT, to edit their settings, to
configure the metronome and playback functions and to adjust the built-in equalizer.
PROG: The KIT home page allows you to select a KIT and to start/stop the built-in metronome or song
player.
DRUM: This page is used to assign a sound to the selected drum channel and to set the tuning and
volume.
The channel can be selected using the CHANNEL buttons (left) or simply by hitting the
assigned pad.
Note: The Rim channels of toms 1 through 4 and the snare (PERC 1~5) can be selected by
simultaneously pressing the MORE and TRIG buttons.
ENV: This is where you fine-tune the selected sound and specify the loop setting for each channel.
CFNC: If you like, you can also assign a function to a pad rather than a sound. Doing so would allow
you to start and stop the metronome, or to select the next KIT by hitting such a pad.
KFNC: The HHPOS function on this page allows you to set the hi-hat’s opening level (“bashiness”)
without recalibrating the pad. This is especially useful if the left foot is used for something else
(like double bass drum playing, for instance).
VOL: This is where you set the level and stereo placement (pan) of the selected channel.
EQ: Each KIT is equipped with a 3-band equalizer. It can either be applied to all instruments or just
for a specific channel.
ACMP: This page contains the built-in player. Use it to specify whether you wish to play to a song or
the built-in metronome. The metronome’s settings and the tempo can be customized and
saved.