User's Manual

Android TV BOX User Manual

Select “Set up Wi-Fi hotspot” to set up “Network SSID”、“Security”、“Password” parameters

* Ensure connected to the wired network, the box can be used as wireless AP to support

more wireless devices access in the family

1.1.10 The Step that how to reflash the box

1) Uncompress the downloaded firmware (ROM) to the root of and SD card(format your SD card

first).

2) Insert the SD Card into powered-off Box (power cable not plugged in) with no external USB

storage attached.

3) Using a toothpick, insert into the AV port of Box, press and hold the hidden button while plugging

power in.Do not release until you see the screen of Robert Logo.

4) Update will run automatically. When it is done then choose “Reboot”. You can disregard any

errors that display after the update, they are not relevant to your device.

5) When system has rebooted then you should first check to ensure wifi is working by going to

Settings->Wi-Fi. Turn on the wifi if it’s off and you should be able to connect.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.