User's Manual

本设计图纸版权归本公司所有，未经本公司书
面同意不得复印.
本图纸应与说明，产品状况，产品结构设计图及有
关图纸协调使用，发现任何差异请立即通知设计师.
图档中所有尺寸比例为1:1.
公差: L(长)*(宽): +1/-1mm,H(高): ±1mm
项目信息
品牌： Victure
立项时间：
计划时间：
型号： AX18
类型： 说明书
版本号： V1.0
版本变
更描述：
3. 设计经理审核：
1. 设计师：
4. 项目经理确认：
2. 销售确认：
日 期：
5. 品牌总监审核：
2020/10/20
设计审核
1/1
当前页/全部页码
尺寸：89x119mm（6折页）
印刷颜色：
4色印刷
120g 进口双胶
材质：
特种工艺：
备注：
Customer service
Scan the QR code below or search "Victure Home" on YouTube to view more
function.
Send us your Order Screenshot via email [e-mail] to
extend the warranty to 12 months.
Lifetime professional tech support is provided by Victure.
Any questions or problems, please feel free to contact us.
How to use your AX1800 Dual Band Wi-Fi 6 Smart Router
Warranty
· AX18 ×1
· Ethernet Cable ×1
· Power Adapter ×1
· User Manual ×1
Package Contents
Configure the Router by using Victure Home APP
FAQs
封面
正面
背面
1 0
Made in China
封底
User Manual
AX1800 Dual Band Wi-Fi 6 Smart Router
AX18
User Manual
AX1800 Dual Band Wi-Fi 6 Smart Router
AX18
(3) (4)
(1) Download and install Victure Home APP.
Product Diagram
or
Wireless
Wired
Modem
Internet
NAS+HDD
Optical fiber/
phone line
or
Broadband network port
(1) Default Wi-Fi Name (SSIDs):
2.4G: Victure-XXXX (Low 4 bits of MAC)
5G: Victure-5G-XXXX
(2) LED Indicators：
ON
OFF
OFF
Blinking Quickly
Indicators Status Description
System
indicator
The router is starting and/or is connecting to the internet.
The router is not connecting to the power.
ON
The router is normal and connected to th internet.
Blinking Quickly
The router is in fault.
The router is starting.
The port is disconnected.
The port is transmitting data.
WAN/
LAN1-4
indicator
Blinking Slowly
Blinking
The WPS/Mesh function is on and waiting for pairing.
Description
(3) Ports/Button:
Ports/Button
DC Power Port Connect to the power supply, 12VDC/1.0A.
WAN Port Connect to the Internet.
LAN1-LAN4 Connect to PC or network switch using Ethernet cable.
RST/WPS/
MESH Button
Reset to factory default settings: when the router is powered
on, press and hold this button for 5-8 seconds until the system
indicator blinks quickly,the router will be reseted to facory default.
Activate WPS/Mesh function: when the router is powered on,
press and hold this button for 1-3 seconds, the system indicator
will blinking quickly for 2 minutes, until WPS/Mesh pairs
successful or overtime.
Victure Home
or
(2) Open Victure Home APP, Login with your Victure ID. You should register
one first.
Activate the WLAN function on your Phone and
connect to Victure-5G-XXXX or Victure-5G-XXXX.
Note: The “XXXX” is the low four bits of the MAC address of this router.
Time Zone Setting.
According to your location, please select a appropriate option from the list.
(5) Internet Setting.
Choose a suitable connection type from the list and fill in the information
required.
(6) IPTV Setting, you can open the IPTV function in this page and select a
suitable mode.
(7)
Wireless Setting.
Create passwords for 2.4G Wi-Fi and 5G Wi-Fi (Here users could also revise
the default Wi-Fi name).
(8) For security, please create a new login password for your router.
(9) The coming page is the summary information for your setting. Please
remember your Wi-Fi name and password.
Then your router will restart automatically. This time your phone will be
disconnected from the router. Please back to the WLAN list of your phone to
choose the new Wi-Fi name and input the correct password. Now, you could
enjoy the Wi-Fi.
Connection Type Description
Static IP
Input the IP address, Subnet Mask, Default Gateway,
DNS from your ISP.
Dynamic IP
No information required. Please confirm with your ISP
if Dynamic IP is supported.
PPPoE
Input User Name and Password from your ISP.
PPTP
Input Server Address, User Name and Password from
your ISP.
L2TP
Input Server Address, User Name and Password from
your ISP.
1. Unable to log in the router’s web page on Phone?
Please check if your Phone has connected to the Wi-Fi of the router, whether it
can connect to the Internet or not. And please make sure you have entered the
correct default url http://victurelink.net or IP address (you might have changed
the IP address).
2. If I forget the router’s login password?
If you have registered the router to your Victure Home APP account, you may
login in this APP to find back the router’s login password.
And also you may reset the router to factory default settings. Keep the router
powered on, then press and hold the RST/WPS button for 5-8 seconds until
system indicator becomes blinking quickly, then the router will reset to default,
the password would be resumed to admin.
3. How to do if I forget the password of the Wi-Fi?
If you have registered the router to your Victure Home APP account,you may
login in this APP to find back the password of Wi-Fi.
And also you may find it back by using PC WEB Broswer. Connect any LAN port
of the router to the computer with RJ45 cable and then open any web browser to
login the web management page to check the Wi-Fi password in the Basic—
ireless—Wireless Settings. (Please ensure your computer has been set to “obtain
an IP address automatically” in advance).
Login in Victure Home APP and turn on Smart Integrated SSID on Wi-Fi settings
Page, or og in the router’s web page on Phone or PC to turn on Smart Integrated
SSID on Wiereless settings Page, then wait for the setting to complete.
If Wi-Fi is disconnected, please reconnect.
4. How to open the function of Smart Integrated SSID to use the 2.4G and 5G Wi-Fi
by a same SSID?
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment .
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
This equipment should be installed and operated with minimum distance
20cm between the radiator& your body.
RF Radiation Exposure Statement
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including
interference that may cause undesired operation.
FCC warning:
Android iOS
RST
WPS LAN1 LAN2 LAN3 LAN4 WAN
DC
IN
7 8 9 10
1
6
2 3 4
5