BRAND OWNER 1byone Products Inc. 1230 E Belmont Street, Ontario, CA, USA 91761 Customer Service: +1 909-391-3888 www.1byonebros.
Model: 1-AD04NA01, EA055 MULTIMEDIA SPEAKER SYSTEM HIGH FIDELITY CLASSIC DESIGN WWW.1BYONEBROS.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions – All safety and operating instructions should be read before operating this speaker. 2. Keep these instructions – The safety and operating instructions should be retained for future reference. 3. Heed all warnings – All warnings on the speaker system and in the operating instructions should be adhered to. 4. Follow all instructions – All operating and use instructions should be followed. 5.
speaker system to rain or moisture. This system should not be exposed to dripping or splashing and objects filled with liquids, such as vases, should not be placed on the speakers. 17. WARNING: Make sure the system’s power plug and the electrical outlet are easily accessible so the speaker system can be quickly disconnected from power in case of emergency. 18. The equipment should be used at a maximum of 35º C (95ºF) ambient temperature. 19.
Rear View 9 1 2 3 4 56 7 8 1. Power Jack 2. Power Button 3. Speaker output for right speaker 4. Coaxial jack 5. Optical jack 6. RCA 1 Jack 7. RCA 2 Jack 8. Speaker Input for Right Speaker 9. Inverted Tube Side Control Panel 1. Volume Control 2. Treble Control 3. Bass Control 4.
Included Items 1 x Speaker Set (2 Speakers) 1 x Power Cord 1 x Connecting Cable for The Right Speaker 1 x Dual RCA to Dual RCA Audio Cable 1 x Instruction Manual NOTE: Before using the Multimedia Speaker System for the first time, check the package contents to ensure all parts are free of visible damage. Connectivity and Operating Guide 1. Place the speakers symmetrically and equidistant from the listener, with the distance between each speaker and listener no less than 1 meter (3.28ft).
RCA Mode (RCA 1 & RCA 2) 1. Press the MODE button on the side panel of the active speaker switch to RCA 1 or RCA 2, you will hear an “RCA 1” or “RCA 2” notification sound, and the indicator lights above RCA 1 or RCA 2 will turn white. 2. Connect audio source (personal computer, turntable, etc.) to the RCA 1 or RCA 2 input port (note color matching) on the rear panel of the active speaker using an audio cable. 3. Play music on the connected device and adjust the settings to the desired level.
Power Management Function The speaker system will automatically go into standby mode after 30 minutes of inactivity. To resume operation, playing music on your connected device. Specifications Model 1-AD04NA01, EA055 Bluetooth version 5.0 (Transmission range 33 ft) Output Power RMS: 60W (30W x 2) Peak Power: 100W Voltage Supply 100V~240V, 60Hz 1.
Troubleshooting Problem Solution Check if the speaker is ON. Try to turn up the volume using the master volume control. No sound Ensure the audio cables are firmly connected and the input is set correctly on the speakers. Check if there is a signal output from the audio source. Cannot connect via Bluetooth Make sure the speaker is switched to Bluetooth input. If it is in other audio input modes, Bluetooth will not connect. Disconnect from any Bluetooth device, then try again.
Customer Service/Kundenservice Service Clients/Atención al cliente/Assistenza Clienti UNITED STATES Phone: +1 909-391-3888 (Mon-Fri 9:00am - 5:00pm PST) Email: ushelp@1byonebros.com CANADA Email: cahelp@1byonebros.com UNITED KINGDOM Phone: +44 158 241 2681 (Mon-Fri 9:00am - 6:00pm UTC) Email: ukhelp@1byonebros.com GERMANY/FRANCE Email: euhelp@1byonebros.com ITALY/SPAIN BRAND OWNER 1byone Products Inc. 1230 E Belmont Street, Ontario, CA, USA 91761 Customer Service: +1 909-391-3888 www.1byonebros.
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.