User Guide

TROUBLE SHOOTING OF PRESSURE COOKER
The oat doesn’t rise
LED repeatedly ashed Lid
The LED displays NoPr
The LED displays aa
The Multi-Use Pressure
Cooker beeps
intermittently
The Multi-Use Pressure
Cooker makes clicking or
light crackling sounds
The silicone gasket is out
of place.
Add water and ingredients according to
the recipe, doubling if necessary. Never
exceed max ll lines.
The oat is obstructed by
the lid locking pin - the lid
is not closed correctly.
Re-position lid to lock properly in place.
The lid is not in the correct
position for the selected
program.
Lock lid in place of pressure cooking
programs. Remove lid for Saute.
The Multi-Use Pressure
Cooker is not coming to
pressure during preheating.
Check for steam leaks and lid leaks as
indicated in previously listed
troubleshooting issues. If you are cooking
frozen food in the pressure cooker, restart
your selected program.
The inner pot overheated.
Press Cancel. Check pot to make sure it is
not damaged or burned. Let pot cool to
room temperature before running the
program again.
The Multi-Use Pressure Cooker
is overheating and has reduced
the heating temperature. Starch
deposits at the bottom of the
inner pot might be preventing
even heat distribution.
Press Cancel. Inspect and remove any
deposits on the bottom of the inner pot.
The power switching and
expanding pressure while
changing temperature can
cause clicking noises.
This is a normal sound.
The outside base of the
inner pot is wet.
Wipe inner pot and inside of base dry
before using your Multi-Use Pressure
Cooker.
28