User Guide
GETTING STARTED
Initial Test Run (Water Test)
1. Add 3 cups of water to the Removable Inner Pot.
2. Close the Lid and lock in place.
3. Turn Steam Release Handle to the ‘Sealing’ position.
4. Select the STEAM program.
5. Press the “Start” button and adjust steaming time to 2 minutes. The program will be start.
6. Steam will release until the Float Valve is up. Once program is done, turn Steam Release
Handle to ‘Venting’ to quick release pressure.
PRESS STEAM
TO START TEST
SET TIME TO
2 MINUTES
10
TURN TO QUICK RELEASE
STEAM(CARE OF THE HOT STEAM)
FILL WITH 3 CUPS
OF WATER
CLOSE LID AND
LOCK IN PLACE
TURN STEAM
RELEASE HANDLE
TO SEALING