Specification Sheet

ManualsBrands10Gtek ManualsComputers & Accessories40 Gigabit QSFP+ MPO Multi-Mode Transceiver, 40GBASE-SR4 Module for Force10 GP-QSFP-40GE-1SR, 850nm, DDM, 100m

Table Of Contents

10Gtek Transceivers Co.,Ltd

Driving Your Next Generation Networks www.10gtek.com

E-mail:info@10gtek.com Tel: +86 755 2998 8100 Fax: +86 755 6162 4140

40Gbps QSFP+ SR4 Optical Transceiver

AMQ10-SR4-M1

Features

 Support up to 40Gb/s bit rates

 Hot‐pluggable QSFP+ footprint, Built‐in digital diagnostic

 Maximum link length of 100m OM3 MMF and 150m OM4 MMF

 850VCSEL laser and PIN photodiode

 QSFP+ MSA package with MPO connector

 +3.3V power supply

 power dissipation < 1.5W

 Temperature range 0~70℃

 RoHS Compliant

Applications

 40GBASE‐SR4

 40G‐IB‐QDR

 Parallel optical links

Description

AMQ10-SR4-xx transceivers include a 1 x 4 850nm VCSEL array and 1 x 4 PIN array

comply with QSFP+ Multi

‐

Source Agreement (MSA) SFF

‐

8436, and can support

applications on 100m OM3 MMF and 150m OM4 MMF. Digital diagnostics functions are

available via 2‐wire serial interface, which is compliant with QSFP+ MSA.

Recommended Operating Conditions

Table.1 Recommended Operating Conditions

Parameter

Symbol

Min.

Typ.

Max.

Unit

Notes

Operating Case Temperature

+70

℃

Power Supply Voltage

Vcc

3.14

3.3

3.47

Summary of content (10 pages)

PAGE 1
0Gtek Transceivers Co.,Ltd www.10gtek.com Driving Your Next Generation Networks 40Gbps QSFP+ SR4 Optical Transceiver AMQ10-SR4-M1 Features  Support up to 40Gb/s bit rates  Hot‐pluggable QSFP+ footprint, Built‐in digital diagnostic  Maximum link length of 100m OM3 MMF and 150m OM4 MMF  850VCSEL laser and PIN photodiode  QSFP+ MSA package with MPO connector  +3.3V power supply  power dissipation < 1.
PAGE 2
10Gtek Transceivers Co.,Ltd www.10gtek.com Driving Your Next Generation Networks Power Supply Current ICC 430 mA Power Dissipation PD 1.5 W Data Rate per Lane DR 10.3125 Gbps Link Distance on OM3 MMF 100 m Link Distance on OM4 MMF 150 m Performance Specifications Absolute Maximum Ratings These values represent the damage threshold of the module.
PAGE 3
10Gtek Transceivers Co.,Ltd www.10gtek.com Driving Your Next Generation Networks Difference in launch power between any two lanes (OMA) PO,PEAK Peak power Launch power in OMA minus TDP dB 4 dBm ‐6.5 Transmitter and Dispersion penalty (TDP) TDP Extinction Ratio ER dBm 3.5 dB 3 dB Optical return loss tolerance Average launch power of OFF transmitter 4 POFF 12 dB ‐30 dBm >86% at 19um Encircled Flux <30% at 4.5um Table.4 Transmitter Specification (Electrical) Parameter Symbol Min.
PAGE 4
10Gtek Transceivers Co.,Ltd www.10gtek.com Driving Your Next Generation Networks Receiver Specification Table.5 Receiver Specification (optical) Parameter Symbol Min. Average receiver power Pin, AVG ‐9.5 Typ. Receiver reflectance Receiver power (OMA) Stressed receiver (OMA) Pin, OMA sensitivity Max. Unit 2.4 dBm ‐12 dBm 3 dBm ‐5.4 Peak power PO, PEAK LOS Assert LOS LOS De‐assert LOSD LOS Hysteresis LOSH 4 Condition dBm dBm dBm ‐30 ‐22 0.5 dBm dBm Table.
PAGE 5
10Gtek Transceivers Co.,Ltd www.10gtek.
PAGE 6
10Gtek Transceivers Co.,Ltd www.10gtek.
PAGE 7
10Gtek Transceivers Co.,Ltd www.10gtek.com Driving Your Next Generation Networks Timing Electrical Interface Item Parameter Symbol Min Max Units Conditions Time from power on, hot plug or 1 Time to initialize t_init 2000 ms reset until the module is fully functional.
PAGE 8
10Gtek Transceivers Co.,Ltd www.10gtek.com Driving Your Next Generation Networks 2‐wire Management Interface The transceivers provide management two‐wire interface and the management memory map is specified by SFF‐8436. 8 E-mail:info@10gtek.
PAGE 9
10Gtek Transceivers Co.,Ltd www.10gtek.com Driving Your Next Generation Networks Mechanical Package Dimensions (Unit: mm) 9 E-mail:info@10gtek.
PAGE 10
Gtek Transceivers Co.,Ltd www.10gtek.com Driving Your Next Generation Networks Application Cautions ESD This module high speed pins withstand 1KV electrostatic discharge on Human Body Model per JESD22‐A114. The exception of high speed pins withstand 2KV electrostatic discharge based on Human Body Model per JESD 22‐A114. The QSFP+ module meet ESD requirement in EN61000‐4‐2, criterion B test specification. The transceiver is shipped in ESD protective packaging.